Water Truck Systems

Standard Specifications:

• 3/16" Tank Shell, Floor, Top, Baffles and Heads.

• All welds are full penetration welded 100% inside and out.

• Crawl hole and 6" water flow holes in each baffle.

• Mounting frame is constructed of 6" structural channel.

• Access & top fill hole. 24" x 24" with tapered anti-slosh ring. (non seal lids available)

• Rear mounted integral access ladder / 2-1/2" hydrant fill pipe.

• Corner clearance & center I.D. lights punched, recessed & rubber mounted

• Fenders to cover tandem or single axle. Fully welded to tank

• Draft hose storage tubes installed between longmembers. With retaining chain.

• Tanks come standard with draft prime tank.

Standard Installation Specifications:

• Berkeley B3ZRKS water pump (750 GPM @ 60 PSI)

• Muncie Air Shift PTO with balanced driveline.

• 6 Spring mounting brackets.

• Manual butterfly valves for switching from draft to pressure.

• Air cab control tower. (includes PTO switch mount)

• 4" Draft plumbing with 4" female "Cam-lock" fitting & plug port.

• 3" Pressure plumbing to spray heads and hose connections.

• Push block frame extension with tool basket.

Common Options:

• Newton 10"x10" Kwik Dump (www.newtonkwikdump.com)

• Roadrunner Water Cannon (www.roadrunnersales.com)

• USFS packages including extra baffles, hose manifolds, manhole lids ect.

• Manual or electric hose reels.

• Hydraulic drive water pumps.

• Extra spray heads.

• Gravity drop (air operated trap door style)

• Custom paint scheme.

Call us today with your custom needs